 |
Back |
For full Warranty details please refer to the product profile!
50ml cart 1-1 kit
400ml cart 1-1 kit
2 pint kit 1-1 metal
2 gallon kit 1 - 1 metal
10 gallon kit 1 - 1 metal
Engineering Materials - General Purpose - Adhesives and Sealants
Details: R-2145 - Extremely tough fast cure elastomer
| Product Profile: | R-2145_R1-2145P.pdf |
|---|---|
| MSDS PDF A: | R2145AM.pdf |
| MSDS PDF B: | R2145BM.pdf |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Adhesives and Sealants |
| NuSil ID: | R-2145 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | 280 g/M |
| Cure System: | PT Addition |
| Solids Content: | |
| Work Time: | |
| Cure Time/Temp: | 2 HR / 65 |
| Post Cure Time/Temp: | |
| Specific Gravity: | 1.18 |
| Durometer Type A Certified: | |
| Durometer Type A Typical: | 45 |
| Tensile psi Certified: | |
| Tensile psi Typical: | 1125 |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | 7.8 |
| Elongation Percent Certified: | |
| Elongation Percent Typical: | 450 |
| Tear PPI Certified: | |
| Tear PPI Typical: | 150 |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | 26.2 |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | 650/14.4 |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | 824 |
| Operating Temp: | -65 to 240 |
| Plasticity/Viscosity/Extrusion Typical: | |
| Stress Strain: | |
| Mix Ratio: | 1:1 |
| Colour: | Gray |
| Comments: | Extremely tough fast cure elastomer |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
