 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Unrestricted - LSR Elastomers
Details: MED-4815 - Injection Molding Elastomer
| Product Profile: | MED-4815P.pdf |
|---|---|
| MSDS PDF A: | MED4815AM.pdf |
| MSDS PDF B: | MED4815BM.pdf |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Unrestricted |
| Description: | LSR Elastomers |
| NuSil ID: | MED-4815 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | Platinum Addition |
| Solids Content: | 100 |
| Work Time: | |
| Cure Time/Temp: | 5 M / 150 |
| Post Cure Time/Temp: | Optional |
| Specific Gravity: | 1.1 |
| Durometer Type A Certified: | 13-18 |
| Durometer Type A Typical: | 15 |
| Tensile psi Certified: | 750 (5.2) |
| Tensile psi Typical: | 925 (6.4) |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | |
| Elongation Percent Certified: | 700 |
| Elongation Percent Typical: | 925 |
| Tear PPI Certified: | 90 (15.8) |
| Tear PPI Typical: | 125 (21.9) |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | |
| Plasticity/Viscosity/Extrusion Typical: | 75 g/minute |
| Stress Strain: | 55 (0.4) @ 200 |
| Mix Ratio: | 1:1 |
| Colour: | |
| Comments: | Injection Molding Elastomer |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
