 |
Back |
For full Warranty details please refer to the product profile!
2 pint kit 1-1 metal
2 gallon kit 1 - 1 metal
10 gallon kit 1 - 1 metal
Healthcare Materials - Restricted - Dispersions
Details: MED10-6400 - 1.43 R.I. In Xylene
| Product Profile: | MED10-6400P.pdf |
|---|---|
| MSDS PDF A: | MED106400AM.pdf |
| MSDS PDF B: | MED106400BM.pdf |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | Dispersions |
| NuSil ID: | MED10-6400 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | Platinum Addition |
| Solids Content: | 35 |
| Work Time: | |
| Cure Time/Temp: | |
| Post Cure Time/Temp: | |
| Specific Gravity: | 1.08 |
| Durometer Type A Certified: | 20-35 |
| Durometer Type A Typical: | 30 |
| Tensile psi Certified: | 950 |
| Tensile psi Typical: | 1500 |
| Tensile MPa Certified: | 6.6 |
| Tensile MPa Typical: | 10.3 |
| Elongation Percent Certified: | 600 |
| Elongation Percent Typical: | 775 |
| Tear PPI Certified: | 130 |
| Tear PPI Typical: | 150 |
| Tear kN/m Certified: | 22.8 |
| Tear kN/m Typical: | 26.3 |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | |
| Plasticity/Viscosity/Extrusion Typical: | 600 |
| Stress Strain: | 350 (2.4) @ 300 |
| Mix Ratio: | 1:1 |
| Colour: | |
| Comments: | 1.43 R.I. In Xylene |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
