 |
Back |
For full Warranty details please refer to the product profile!
1 pint metal can
1 Gallon metal
5 gallon metal container
Healthcare Materials - Restricted - Dispersions
Details: MED10-6605 - One Part In Xylene
| Product Profile: | MED10-6605P.pdf |
|---|---|
| MSDS PDF A: | MED10-6605M.pdf |
| MSDS PDF B: | - - |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | Dispersions |
| NuSil ID: | MED10-6605 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | Acetoxy |
| Solids Content: | 29 |
| Work Time: | |
| Cure Time/Temp: | 5 D / R.T. |
| Post Cure Time/Temp: | |
| Specific Gravity: | 1.09 |
| Durometer Type A Certified: | 20-30 |
| Durometer Type A Typical: | 25 |
| Tensile psi Certified: | 1000 |
| Tensile psi Typical: | 1575 |
| Tensile MPa Certified: | 6.9 |
| Tensile MPa Typical: | 10.9 |
| Elongation Percent Certified: | 550 |
| Elongation Percent Typical: | 1050 |
| Tear PPI Certified: | 50 |
| Tear PPI Typical: | 125 |
| Tear kN/m Certified: | 8.8 |
| Tear kN/m Typical: | 22.0 |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | |
| Plasticity/Viscosity/Extrusion Typical: | 700 |
| Stress Strain: | 160 (1.1) @ 300 |
| Mix Ratio: | 1 Part |
| Colour: | |
| Comments: | One Part In Xylene |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
