 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Restricted - Inks and Master Batches
Details: MED3-4102 - HCR Masterbatch 75% TiO2
| Product Profile: | MED3-4102P.pdf |
|---|---|
| MSDS PDF A: | MED34102M.pdf |
| MSDS PDF B: | |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | Inks and Master Batches |
| NuSil ID: | MED3-4102 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | |
| Solids Content: | 99 |
| Work Time: | |
| Cure Time/Temp: | |
| Post Cure Time/Temp: | |
| Specific Gravity: | |
| Durometer Type A Certified: | |
| Durometer Type A Typical: | |
| Tensile psi Certified: | |
| Tensile psi Typical: | |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | |
| Elongation Percent Certified: | |
| Elongation Percent Typical: | |
| Tear PPI Certified: | |
| Tear PPI Typical: | |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | |
| Plasticity/Viscosity/Extrusion Typical: | |
| Stress Strain: | |
| Mix Ratio: | 1 part |
| Colour: | |
| Comments: | HCR Masterbatch 75% TiO2 |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
