 |
Back |
For full Warranty details please refer to the product profile!
50ml cart 1-1 kit
400ml cart 1-1 kit
2 pint kit 1 - 1 glass
2 gallon kit 1 - 1 metal
10 gallon kit 1 - 1 metal
Engineering Materials - General Purpose - Potting and Encapsulating Gels
Details: GEL8-8150 - For potting encapsulating backfilling dampening applications Firm gel 1:1 ratio, room temp
| Product Profile: | GEL8-8150P.pdf |
|---|---|
| MSDS PDF A: | GEL88150AM.pdf |
| MSDS PDF B: | GEL88150BM.pdf |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Potting and Encapsulating Gels |
| NuSil ID: | GEL8-8150 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | 500 cP |
| Cure System: | PT Addition |
| Solids Content: | - - |
| Work Time: | |
| Cure Time/Temp: | - - |
| Post Cure Time/Temp: | 30 min @ 100 C |
| Specific Gravity: | 0.97 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | - - |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | - - |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | - - |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | - - |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | - - |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | - - |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | - - |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 1:1 |
| Colour: | Clear |
| Comments: | For potting encapsulating backfilling dampening applications Firm gel 1:1 ratio, room temp |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
