 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Silicone Foams
Details: R-2380 - Low Density / Soft 18 Ib/ft? (2.32 kg/m?)
| Product Profile: | R-2370_R-2380P.pdf |
|---|---|
| MSDS PDF A: | R2380AM.pdf |
| MSDS PDF B: | R2380BM.pdf |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Silicone Foams |
| NuSil ID: | R-2380 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | 5.7k |
| Cure System: | Tin Condensation |
| Solids Content: | |
| Work Time: | 3 M |
| Cure Time/Temp: | 10 M / R.T. |
| Post Cure Time/Temp: | |
| Specific Gravity: | 0.34 |
| Durometer Type A Certified: | |
| Durometer Type A Typical: | |
| Tensile psi Certified: | |
| Tensile psi Typical: | |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | |
| Elongation Percent Certified: | |
| Elongation Percent Typical: | |
| Tear PPI Certified: | |
| Tear PPI Typical: | |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | -65 to 200 |
| Plasticity/Viscosity/Extrusion Typical: | |
| Stress Strain: | |
| Mix Ratio: | 100:6 |
| Colour: | Tan |
| Comments: | Low Density / Soft 18 Ib/ft? (2.32 kg/m?) |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
