 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Unrestricted - LSR Elastomers
Details: MED1-4855 - Injection Molding Elastomer Two-part, translucent
| Product Profile: | MED1-4855P.pdf |
|---|---|
| MSDS PDF A: | |
| MSDS PDF B: | |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Unrestricted |
| Description: | LSR Elastomers |
| NuSil ID: | MED1-4855 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | - - |
| Cure System: | Platinum Addition |
| Solids Content: | - - |
| Work Time: | 24 h |
| Cure Time/Temp: | - - |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | 1.15 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | 55 |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | 1,100 psi |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | 7.6 MPa |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | - - |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | 225 ppi |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | 39.7 |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | - - |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Injection Molding Elastomer Two-part, translucent |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
