 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Thermally Conductive Materials
Details: R-2949 - Low / High Temperature 15?10 (-4) cal/cm-sec-C* (0.63 W/mK)
| Product Profile: | R-2949P.pdf |
|---|---|
| MSDS PDF A: | # |
| MSDS PDF B: | # |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Thermally Conductive Materials |
| NuSil ID: | R-2949 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | 100k |
| Cure System: | PT Addition |
| Solids Content: | |
| Work Time: | 3 HR |
| Cure Time/Temp: | 34 M / 150 |
| Post Cure Time/Temp: | |
| Specific Gravity: | |
| Durometer Type A Certified: | |
| Durometer Type A Typical: | 75 |
| Tensile psi Certified: | |
| Tensile psi Typical: | 275 |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | 1.9 |
| Elongation Percent Certified: | |
| Elongation Percent Typical: | 50 |
| Tear PPI Certified: | |
| Tear PPI Typical: | 40 |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | 7 |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | 920 |
| Operating Temp: | -115 to 265 |
| Plasticity/Viscosity/Extrusion Typical: | |
| Stress Strain: | |
| Mix Ratio: | 15:1 |
| Colour: | White |
| Comments: | Low / High Temperature 15?10 (-4) cal/cm-sec-C* (0.63 W/mK) |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
