 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Fluorosilicone Adhesive and Sealant
Details: CF2-3521 - Fluorosilicone elastomer cures at room temperature or rapidly with heatTwo-part.
| Product Profile: | CF2-3521P.pdf |
|---|---|
| MSDS PDF A: | CF23521A.pdf |
| MSDS PDF B: | CF23521B.pdf |
| MSDS PDF C: | |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Fluorosilicone Adhesive and Sealant |
| NuSil ID: | CF2-3521 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | Paste |
| Cure System: | PT Addition |
| Solids Content: | |
| Work Time: | 1 HR |
| Cure Time/Temp: | 36 M / 150 |
| Post Cure Time/Temp: | |
| Specific Gravity: | 1.3 |
| Durometer Type A Certified: | |
| Durometer Type A Typical: | 35 |
| Tensile psi Certified: | |
| Tensile psi Typical: | 750 |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | 5.2 |
| Elongation Percent Certified: | |
| Elongation Percent Typical: | 325 |
| Tear PPI Certified: | |
| Tear PPI Typical: | |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | -65 to 240 |
| Plasticity/Viscosity/Extrusion Typical: | |
| Stress Strain: | |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Fluorosilicone elastomer cures at room temperature or rapidly with heatTwo-part. |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
