We use cookies to give you the best possible experience on our website. By continuing to browse this site, you give consent for cookies to be used. For more details please read our Privacy Policy
Back Back


For full Warranty details please refer to the product profile!



Engineering Materials - Controlled Volatility - Electrically Conductive Materials

Details: CV-1500 - 2.1 ohm - cm Primed Lap Shear 300psi (2.1MPa)

Product Profile: CV-1500.pdf
MSDS PDF A: CV-1500_EU_English.pdf
Basic Product Overview:
Section: Engineering Materials - Controlled Volatility
Description: Electrically Conductive Materials
NuSil ID: CV-1500
Viscosity A:
Viscosity B:
Viscosity Mixed:
Cure System: Oxime
Solids Content:
Work Time: 10 M
Cure Time/Temp: 7 D / R.T.
Post Cure Time/Temp:
Specific Gravity: 1.25
Durometer Type A Certified:
Durometer Type A Typical: 80
Tensile psi Certified:
Tensile psi Typical: 650
Tensile MPa Certified:
Tensile MPa Typical: 4.5
Elongation Percent Certified:
Elongation Percent Typical: 20
Tear PPI Certified:
Tear PPI Typical:
Tear kN/m Certified:
Tear kN/m Typical:
Ionic Content* CI - K / Na ppm
Lap Shear psi/Mpa: 325
Volume Resistivity** ohm·cm
Dielectric Strength V/mil:
Operating Temp: -120 to 300
Plasticity/Viscosity/Extrusion Typical:
Stress Strain:
Mix Ratio: 1 Part
Colour: Black
Comments: 2.1 ohm - cm Primed Lap Shear 300psi (2.1MPa)


Back Please note:
Alternative sizes and packaging can and may be supplied, subject to availability of stock.
Products pictured may vary and illustrations are for guidance only!

#Cookies set! #Google set! #Piwik set!