We use cookies to give you the best possible experience on our website. By continuing to browse this site, you give consent for cookies to be used. For more details please read our Privacy Policy
Back Back


For full Warranty details please refer to the product profile!



Engineering Materials - Controlled Volatility - Thermally Conductive Materials

Details: CV-2948 - 1.95 W/mk (47x10(-4) cal/cm-sec-°C), Primed Lap Shear 150 psi (1.0 Mpa)

Product Profile: CV-2948P.pdf
MSDS PDF A: CV2948A.pdf
MSDS PDF B: CV2948B.pdf
Basic Product Overview:
Section: Engineering Materials - Controlled Volatility
Description: Thermally Conductive Materials
NuSil ID: CV-2948
Viscosity A:
Viscosity B:
Viscosity Mixed:
Flow/Viscosity: Paste
Cure System: Tin Condensation
Solids Content:
Work Time: 2.5 HR
Cure Time/Temp: 7 D / R.T.
Post Cure Time/Temp:
Specific Gravity: 1.57
Durometer Type A Certified:
Durometer Type A Typical: 80
Tensile psi Certified:
Tensile psi Typical: 250
Tensile MPa Certified:
Tensile MPa Typical: 1.7
Elongation Percent Certified:
Elongation Percent Typical: 30
Tear PPI Certified:
Tear PPI Typical: 45
Tear kN/m Certified:
Tear kN/m Typical: 7.9
Ionic Content* CI - K / Na ppm
Lap Shear psi/Mpa: 150
Volume Resistivity** ohm·cm
Dielectric Strength V/mil: -
Operating Temp: -115 to 260
Plasticity/Viscosity/Extrusion Typical:
Stress Strain:
Mix Ratio: 100:0.2
Colour: White
Comments: 1.95 W/mk (47x10(-4) cal/cm-sec-°C), Primed Lap Shear 150 psi (1.0 Mpa)


Back Please note:
Alternative sizes and packaging can and may be supplied, subject to availability of stock.
Products pictured may vary and illustrations are for guidance only!

#Cookies set! #Google set! #Piwik set!