 |
Back |
For full Warranty details please refer to the product profile!
50ml cart 1-1 kit
400ml cart 1-1 kit
2 pint kit 1 - 1 plastic
2 gallon kit 1 - 1 plastic bucket
10 gallon kit 1 - 1 plastic
Engineering Materials - General Purpose - Potting and Encapsulating Materials
Details: CF19-2186 - Longer work time allowing more time to encapsulate, low durometer
| Product Profile: | CF19-2186.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusicf19-2186.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Potting and Encapsulating Materials |
| NuSil ID: | CF19-2186 |
| Flow/Viscosity: | A:85k / B:65k |
| Cure System: | PT Addition |
| Work Time: | 15 M |
| Cure Time/Temp: | 30 M / 150 |
| Specific Gravity: | 1.11 |
| Durometer Type A Typical: | 25 |
| Tensile psi Typical: | 1100 |
| Tensile MPa Typical: | 7.6 |
| Elongation Percent Typical: | 600 |
| Tear PPI Typical: | 80 |
| Tear kN/m Typical: | 14.1 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Longer work time allowing more time to encapsulate, low durometer |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
