 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Restricted - Low-Consistency Elastomers
Details: MED-4044 - Low consistency silicone elastomer
| Product Profile: | MED-4044 Product Profile - Polymer Systems Technology Limited.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusimed-4044.pdf |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | Low-Consistency Elastomers |
| NuSil ID: | MED-4044 |
| Cure System: | Platinum |
| Work Time: | 5 HR |
| Cure Time/Temp: | 5 M / 177 |
| Post Cure Time/Temp: | 1 H / 150 |
| Specific Gravity: | 1.09 |
| Durometer Type A Typical: | 40 |
| Tensile psi Typical: | 875 |
| Tensile MPa Typical: | 6.0 |
| Elongation Percent Typical: | 360 |
| Tear PPI Typical: | 150 |
| Tear kN/m Typical: | 26.5 |
| Mix Ratio: | 10:1 |
| Colour: | Trans |
| Comments: | Low consistency silicone elastomer |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
