 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Potting and Encapsulating Materials
Details: CF3-2186 - Two-part translucent pourable silicone system with low viscosity
| Product Profile: | CF3-2186P.pdf |
|---|---|
| MSDS PDF A: | CF32186A.pdf |
| MSDS PDF B: | CF32186B.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Potting and Encapsulating Materials |
| NuSil ID: | CF3-2186 |
| Cure System: | PT Addition |
| Work Time: | 4 M |
| Cure Time/Temp: | 30 M / 150 |
| Specific Gravity: | 1.06 |
| Durometer Type A Typical: | 17 |
| Tensile psi Typical: | 600 |
| Tensile MPa Typical: | 4.1 |
| Elongation Percent Typical: | 525 |
| Tear PPI Typical: | 30 |
| Tear kN/m Typical: | 5.3 |
| Dielectric Strength V/mil: | 500 |
| Operating Temp: | ΤΗτ65 to 240 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Two-part translucent pourable silicone system with low viscosity |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
