 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Unrestricted - Low-Consistency Elastomers
Details: MED-6221 - Pourable optically clear two-part silicone for molding, potting and coating applications
| Product Profile: | MED-6221.pdf |
|---|---|
| MSDS PDF A: | MED6221A.pdf |
| MSDS PDF B: | MED6221B.pdf |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Unrestricted |
| Description: | Low-Consistency Elastomers |
| NuSil ID: | MED-6221 |
| Viscosity A: | 4,200 cP |
| Viscosity B: | 2,200 cP |
| Work Time: | 7 HR |
| Cure Time/Temp: | 30 M / 150 |
| Specific Gravity: | 0.99 |
| Durometer Type A Typical: | 20 |
| Tensile psi Typical: | 255 |
| Tensile MPa Typical: | 1.8 |
| Elongation Percent Typical: | 170 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Pourable optically clear two-part silicone for molding, potting and coating applications |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
