 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - HCR Fluoro Elastomer
Details: FS-3781 - Pre-catalyzed, high consistency elastomer (HCR)
| Product Profile: | FS-3781P.pdf |
|---|---|
| MSDS PDF A: | FS3781.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | HCR Fluoro Elastomer |
| NuSil ID: | FS-3781 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | - - |
| Cure System: | Peroxide |
| Solids Content: | - - |
| Work Time: | - - |
| Cure Time/Temp: | 30 M |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | 1.33 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | 30 |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | 850 |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | 5.9 |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | 300 |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | 40 |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | 7.1 |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | - - |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 1 Part |
| Colour: | Trans |
| Comments: | Pre-catalyzed, high consistency elastomer (HCR) |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
