 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - Controlled Volatility - Adhesives and Sealants
Details: CV-2289-2 - Pourable elastomer Offers a high tear strength and a broad operating temperature range
| Product Profile: | CV-2289-2.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusicv-2289-2.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - Controlled Volatility |
| Description: | Adhesives and Sealants |
| NuSil ID: | CV-2289-2 |
| Flow/Viscosity: | A:65k/B:40k cP |
| Cure System: | Platinum |
| Work Time: | 30 M |
| Cure Time/Temp: | 15 M / 150 |
| Durometer Type A Typical: | 30 |
| Tensile psi Typical: | 750 |
| Tensile MPa Typical: | 5.2 |
| Elongation Percent Typical: | 400 |
| Tear PPI Typical: | 50 |
| Tear kN/m Typical: | 8.8 |
| Lap Shear psi/Mpa: | 425/2.9 |
| Mix Ratio: | 1:1 |
| Colour: | Black |
| Comments: | Pourable elastomer Offers a high tear strength and a broad operating temperature range |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
